The ultra-fine jet mill can be widely used for ultra-fine dry powder materials such as western medicine, traditional Chinese medicine, pesticides, chemical industry, metallurgy, non-metallic minerals, talc, barite, kaolin, quartz, graphite, flame retardant materials, advanced materials, ceramics, etc. Shattered.

Features of superfine jet mill :

1. No temperature rise, because the material is broken under the state of gas expansion, the temperature of the crushing chamber is controlled at room temperature, and the temperature will not rise

2. No pollution, because the material is driven by the airflow to collide and crush by itself, without introducing the medium, so it will not cause pollution during the crushing process of the material

3. Small wear, because the main crushing effect is particle impact and collision, high-speed particles rarely collide with the wall, so it is suitable for crushing materials with Mohs hardness greater than 9

4. Low energy consumption, 30%~50% energy saving than other types of crushers.

5. For flammable and explosive materials, inert gas can be used as a working fluid for crushing.

6. Comply with GMP standards.

The safe operation rules of the ultra-fine jet mill , its main contents are:

(1) All circuits and electrical components of the superfine jet mill should be checked to see if they can work normally

(2) Whether the machine has been grounded to avoid the danger of electric shock when the cabinet is electrified

(3) Whether the spindle is stuck, please deal with it in time

(4) Whether there is any abnormality during the operation of the machine, if any, stop and check immediately

(5) Check whether the blade is tight and whether the blade gap meets the specified standards

(6) Before use, check whether there are sundries in the studio and remove them in time

(7) Feeding can only be started after the superfine jet mill is operating normally.

(8) Before stopping, stop feeding. Wait until the machine is completely discharged and discharged before stopping.

(9) Feeding should be uniform and not excessive, so as not to increase the burden on the machine.

(10) During the operation of the ultra-fine jet mill , cleaning, maintenance, etc. cannot be carried out.