Disc type flat jet mill manufacturers often encounter some dust leakage when using jet mills, which is inevitable. As we all know, long-term inhalation of dust may cause harm to the human body, so it is necessary to avoid excessive inhalation of large amounts of dust during operation. Nowadays, jet mills are widely used in various powder industries. Its excellent performance determines that it is a device with a certain use value, and it is impossible to eliminate it at present, so manufacturers of disc flat jet mills must take countermeasures.

In the process of using jet mills for pulverization, disc-type flat jet mill manufacturers can take the following measures to reduce the harm of dust to the human body:

(1) Because the dust will leak slightly during the manufacturing process, the dust will be emitted, which will pollute the work area. Therefore, the airtightness of the joint of the jet mill should be ensured.

(2) Increase the humidity in the operating area of ​​the jet mill, strengthen ventilation, and reserve fire extinguishing equipment

(3) The manufacturer of the disc-type flat jet mill is equipped with protective equipment for the operator of the jet mill according to the regulations, and the operator should wear the protective equipment correctly according to the regulations.

(4) Do a good job in the maintenance and management of existing dust-proof equipment! Ensure its normal operation and prevent dust

The jet mill is used to crush materials, so the crushed materials and tailings must be discharged in time. When the crusher discharges these crushed materials, there will be dust. So how do disc-type flat jet mill manufacturers solve the problem of too much dust?

1. Install the dust collector: Generally, this type of dust collector can be used together with the shredder. Collect the dust in the collection bag, and then filter the dust from the dust box through the cloth bag and discharge it;

2. Dustproof cloth bag: The cloth bag is tightly tied to the powder outlet of the machine to prevent air leakage and powder leakage. In the process of operation, pay attention to blocking the powder outlet when stopping the machine, and clean up the dust in time.

3. Wood shower or pool dust removal: Mainly use a ventilator to pump the dust to the outside of the crushing chamber, and then use spray dust collection or pool dust collection.