Everyone should have heard of the jet mill, so do you know what factors affect the work of the jet mill? Let's take a look at it with the price editor of the jet mill below!

1. Material characteristics. Generally speaking, the jet mill can be suitable for crushing all brittle materials. However, due to the different properties of the materials, their crushing performance is also different. Due to the difference in the strength, density, hardness, viscosity, shape and electrical properties of various materials, the difference in crushing results is inevitably caused, and the strength of the material is an important factor. In addition, because the moisture content of water or oil in some materials or air sources is too high, the properties of crushed materials (such as increased toughness and viscosity) will affect the fineness of crushing.

2. Processing capacity. Due to the difference in processing capacity, the crushing fineness of the same material is also different. Generally speaking, the processing capacity is directly proportional to the particle size of the product. However, if the processing volume is too small, the chance of collision between particles will be reduced, thus affecting the fineness

3. The influence of back pressure. The back pressure is the average pressure of the gas in the crushing chamber. Since the spray speed of the crushing nozzle is mainly determined by the difference between the nozzle inlet pressure and the outlet pressure, the greater the pressure difference, the greater the flow rate. Therefore, the increase in back pressure is not conducive to crushing. In production, the increase in the resistance of the capture system will increase the back pressure of the pulverizer and affect the explosive effect of the powder. Therefore, be sure to check the resistance of the capture system

To sum up, the price editor of this jet mill tells: about the knowledge of the factors that affect its work, I hope you can learn more through the introduction of the above editor.