Jet mills have been widely used in some industries, so what should we pay attention to in the process of use? Let's take a look at it with the price editor of the jet mill below!

1. During the production process, the temperature rise of the bearing must be checked frequently. When the temperature rises above 50℃, the machine should be shut down and checked to find out the cause and troubleshoot 

2. When the new jet mill is running, the transmission belt is easy to stretch. Pay attention to adjusting the proper tightness of the belt to ensure the service life of the belt.

3. The wearing parts should be checked frequently and replaced in time to ensure production quality and output.

4. Always check whether the blades and bushings of the jet mill are worn. If worn, the yield will decrease and the particle size will become coarser. Replace when worn 

5. Use No. 2 special grease of 2 to 265-295 degrees to lubricate and lubricate the main engine and grading moving bearings

6. The grease replacement cycle of the bearings of the jet mill is 2000 hours, and the filling amount of the smooth grease is 1/2 (upper size) or 3/4 (lower size) of the space in the bearing cavity. Do not fill with smooth grease too much, otherwise it will cause the bearing temperature to be too high

7. The grease replacement cycle of the screw feeder of the laboratory jet mill is 4000 hours, and the general calcium-based smooth grease is added.

In summary, the price editor of this jet mill tells: about some relevant knowledge that needs to be paid attention to during the use of the jet mill, I hope you can learn more through the introduction of the above editor.