Today, I will take you to know the advantages of the ultra-fine jet mill, so that you can have a better understanding of it. The following is an introduction to the advantages of the ultra-micro jet mill:

1. The output is high and the effect is good. The ultra-fine jet mill adopts a grading crushing method, first coarsely crushing, then fine powder, which extends the crushing stroke and makes the material crushed layer by layer during the flow process, which greatly improves the work efficiency and the fineness of the crushing. Spend.

2. The water cooling device is preset, the upper and lower chambers are equipped with water cooling layers, and the external quick-connect joints are used to facilitate the connection of water pipes. Water is used during work, and the high temperature generated during work is taken away through the circulation of water, which not only guarantees the original characteristics of the crushed materials, but also protects the performance of the machine, and avoids potential safety hazards due to high temperatures.

3. Pulse dust removal device

(1) Pulse dust removal is to increase the method of blowing compressed air to remove the dust attached to the filter bag. According to the size of the equipment, there will be several sets of pulse valves, which are controlled by the pulse controller. Each time a set of pulse valves are opened, the high-pressure airflow is used to blow back from the inside to remove the dust on the part of the cloth bag it controls, while other cloth bags work normally, and the next group of pulse valves are opened after a while, so Repeat the cycle.

(2) The pulverized dust is easy to adhere to the cloth bag. If there is no pulse dust removal, the cloth bag will quickly become full of dust, resulting in poor exhaust, resulting in poor transportation of the pulverized powder, lower production efficiency, and cause The temperature of the crushing chamber rises faster, and the machine needs to be shut down to clean the bag, which is time-consuming and labor-intensive.

(3) Strong dust removal ability, high dust removal efficiency and small floor space. Extend the cleaning cycle and reduce labor intensity.

4. Adding an air hammer, many collectors will cause material sticking to the wall and poor recovery, requiring manual knocking and shaking off, which not only increases labor, but also causes appearance deformation, which affects aesthetics and material collection. The machine is equipped with an air hammer on the outer body, which automatically strikes at a fixed time, so that the material collection is smoother and saves time and effort.

5. Small size and high cost performance. This machine adopts an integrated design, is more compact and reasonable, has a small footprint, and has a more stable center of gravity. On the premise of improving the overall performance, it reduces unnecessary investment, making the machine more cost-effective and more capable of working.